TFHRC Home > Safety > Safety Publications > FHWA-HRT-07-046 > References

REFERENCES

1. Council, F.M., and Harkey, D.L. (2006). Traffic Safety Information Systems International Scan: Strategy Implementation White Paper (Report No. FHWA-HRT-06-099). Washington, DC: Federal Highway Administration.
2. Crow, M., Halladay, M.L., Martinovich, S., Delucia, B.H., Harkey, D.L., McNamara, D.J., Ellison, J.W., Lacy, K., Serian, B.L., Griffith, M.S., and MacGregor, S. (2004). Traffic Safety Information Systems in Europe and Australia (Report No. FHWA-PL-04-010). Washington, DC: Federal Highway Administration.
3. Council, F.M., Harwood, D.W., Potts, I.B., Torbic, D.J., Graham, J.L., Hutton, J.M., Delucia, B.H., and Peck, R.C. (2007). Guidance for Implementation of the AASHTO Strategic Highway Safety Plan: A Guide for Addressing Safety Data and Analysis in Developing Emphasis Area Plans (NCHRP Report 500, Volume 21). Washington, DC: National Cooperative Highway Research Program.
4. Federal Highway Administration. “Basic Services Engineer’s Manual, Section 3.2 Data Elements,” IHSDM Documentation at http://www.ihsdm.org/ihsdm_public/html/user/docs/docs_all.html.
5. Federal Highway Administration. “Appendix A—Roadway Segment Inventory Data,” Functional Specification for Master SafetyAnalyst Program (September 2004).
6. Federal Highway Administration. (2006). Draft Executive Summary. Repeatability and Accuracy of Geometry Measured by the Digital Highway Measurement Vehicle.

Previous | Table of Contents

FHWA-HRT-07-046

TFHRC Home | FHWA Home | Feedback United States Department of Transportation - Federal Highway Administration